Professional self-adhesive label manufacturer providing customized production for food, pharmaceutical, logistics, industrial and other industries.
Self-Adhesive Labels · Source FactoryFrom Design to Labeling: Full-Service Support
National Hotline15861193257
Get a Quote
Abrasion-Resistant Barcode Labels for Logistics and Warehousing
Abrasion-Resistant Barcode Labels for Logistics and Warehousing

Self-Adhesive Labels

Abrasion-Resistant Barcode Labels for Logistics and Warehousing

Technical Specifications
Live Chat
National Hotline15861193257

Product Overview

Logistics and warehouse labels fail after they are applied, not during printing. Totes are pushed along sorting lines, cartons rub against each other when stacked, and forklifts clip corners during handling. Ordinary coated-paper labels scuff on the day of receipt, and an unreadable barcode means manual re-entry.

Thermal or thermal transfer depends on how long the label stays on the goods. Thermal labels need no ribbon, cost less and need simpler equipment, which suits short-lived waybills and temporary marks. They are sensitive to heat and solvents and typically last six months to a year. Thermal transfer labels need a ribbon but are far more durable, suited to location codes, asset tags and traceability codes kept long term. The rule is simple: if the label must last more than a year, use thermal transfer.

On fast sorting lines a wear-resistant coating is not optional. Coated paper is the base facestock, cheap and sharp to print. Synthetic paper or PET is available for higher demands, the former tear-resistant, the latter solvent-resistant. Surface treatment matters most here: labels with a wear-resistant coating retain significantly more print than ordinary facestock under the same rub test.

Carton, plastic tote and metal shelf need three different adhesives. General permanent adhesive works on cartons. PP or PE totes have low surface energy and need a high-tack adhesive, or edges lift within two hours. Metal shelves that are wiped regularly need a solvent-resistant adhesive. When one batch goes on several surfaces, choose for the hardest one.

Leave at least 2mm of white space around the barcode. Waybills commonly use 100x150mm or 100x100mm, location codes 60x40mm or 50x30mm, and asset codes as small as 40x20mm. Set the barcode and text in separate areas; with less than 2mm of quiet zone, any print drift cuts into the code.

We can output to your existing WMS or ERP template and print variable data for one-item-one-code programmes. Common sizes are in stock; non-standard sizes take 3-5 working days for a die-cut sample after artwork approval, and bulk orders run to the confirmed sample.

WeChat QR code

Scan to chat on WeChat